Overview

Website Service Review

Sort out all website services you want to protect with WAF. This helps you learn about your workloads and specific data of your workloads so that you can choose and configure appropriate protection policies.

Table 1 Website services

Item	Description
Website and Service Information
Daily peak traffic of website/web application services, including the bandwidth (in Mbit/s) and QPS	Use it as the basis for selecting the service bandwidth and QPS specifications. Note If your website traffic peak exceeds the maximum QPS specifications you are using, WAF will stop checking the traffic and directly forward it to the origin server. There is no protection for your website or applications.
Major user group (for example, major locations where the requests originate from)	Determine the attack source and then set geolocation access control rules to block users from these locations.
Whether the service uses a C/S architecture	If yes, check whether there is an app client, Windows client, Linux client, code callback, or any other client.
Location where the origin server is deployed	Decide which region you want to buy the instance.
Operating system (Linux or Windows) and web service middleware (Apache, Nginx, or IIS) of the origin server	Check whether access control is enabled for the origin server. If yes, whitelist WAF IP addresses.
Domain protocol	Check whether WAF supports the communication protocol used by your site. Note WAF can protect your website only when Client Protocol and Server Protocol are configured based on the real situation of your website. Client Protocol: the protocol used by a client (for example, a browser) to access your website. You can select HTTP or HTTPS. Server Protocol: the protocol used by WAF to forward requests from the client (such as a browser) to the origin server. You can select HTTP or HTTPS.
Service port	Check whether your service ports are within the port range supported by WAF. Standard ports 80: default port when the client protocol is HTTP 443: default port when the client protocol is HTTPS Non-standard ports Ports other than ports 80 and 443
Whether TLSv1.0 or weak encryption suite is supported	Check whether WAF supports the encryption suite used by your site.
Whether advanced anti-DDoS, CDN, or other proxy services are deployed in front of WAF.	Check whether a proxy is used and whether domain name is resolved to a correct address.
Whether the client supports Server Name Indication (for HTTPS services)	If your domain name supports HTTPS, the client and server must support Server Name Indication (SNI).
Service interaction	Understand the service interaction process and service processing logic to facilitate subsequent configuration of protection policies.
Active users	Determine the severity of an attack event to take a low-risk measure to respond it.
Services and Attacks
Service types and features (such as games, cards, websites, or apps)	Help analyze the attack signatures.
Inbound traffic range and connection status of a single user or a single IP address	Help determine whether a rate limiting policy can be configured per IP address.
User group attribute	For example, individual users, Internet cafe users, or proxy users
Whether your website experienced large-volumetric attacks, the attack type, and maximum peak traffic	Determine whether a DDoS protection service is required and determine the DDoS protection specifications based on the peak attack traffic.
Whether your website experienced CC attacks and the maximum peak QPS in a CC attack	Configure the protection policies based on attack signatures.
Whether the pressure test has been performed	Evaluate the request processing performance of the origin server to determine whether service anomaly occurs due to attacks.

How to Use WAF

Table 2 describes the procedure to use WAF.

Table 2 Procedure to use WAF

Step	Description
Applying for dedicated WAF instances	Apply for a dedicated WAF instance. For details, see Applying for Dedicated WAF Engines.
Adding a website to WAF	Add the website you want to protect to WAF. For details, see Step 1: Add a Website to WAF.
Enabling WAF protection	Enable WAF protection to protect added website. Note Using WAF does not affect your web server performance because the WAF engine is not running on your web server. After your domain name is connected to WAF, there will be a latency of tens of milliseconds, which might be raised based on the size of the requested page or number of incoming requests.
Configuring protection rules	Use WAF built-in protection rules and configure custom rules to protect your website. For more details, see Rule Configuration.
Handling false alarms	Mask blocked or logged events which are handled as false alarms. For more details, see Handling False Alarms.
Viewing Dashboard	View protection data of yesterday, today, last 3 days, last 7 days, or last 30 days. For more details, see Dashboard.

For details about how to connect your website to WAF, see Figure 1.

Figure 1 Flowchart of connecting a website to WAF

last updated: 2024-11-08 14:20 UTC - commit: 3d7e87e2762d0d183bd2e3d9c35302c29ab1233b