Querying Private IP Address Details

Function

This API is used to query details about a private IP address using the specified ID.

URI

GET /v1/{project_id}/privateips/{privateip_id}

Table 1 describes the parameters.

Table 1 Parameter description

Name

Mandatory

Description

project_id

Yes

Specifies the project ID. For details about how to obtain a project ID, see Obtaining a Project ID.

privateip_id

Yes

Specifies the ID of the private IP address, which uniquely identifies the private IP address.

Request Parameters

None

Example Request

GET https://{Endpoint}/v1/{project_id}/privateips/d600542a-b231-45ed-af05-e9930cb14f78

Response Parameters

Table 2 Response parameter

Name

Type

Description

privateip

privateip object

Specifies the private IP address objects. For details, see Table 3.

Table 3 Description of the privateip field

Name

Type

Description

status

String

  • Specifies the status of the private IP address.

  • Possible values are as follows:

    • ACTIVE

    • DOWN

id

String

Specifies the ID of the private IP address, which uniquely identifies the private IP address.

subnet_id

String

Specifies the ID of the subnet from which IP addresses are assigned.

If you use the management console, the value of this parameter is the Network ID value.

tenant_id

String

Specifies the project ID.

device_owner

String

  • Specifies the resource using the private IP address. The parameter is left blank if it is not used.

  • The value can be:

    network:dhcp: DHCP service IP address

    network:router_interface_distributed: Gateway IP address

    compute:xxx (xxx indicates the AZ name. For example, compute:aa-bb-cc indicates that the IP address is used by an ECS in the AZ aa-bb-cc.): IP address of an ECS NIC

    neutron:VIP_PORT: Virtual IP address

    compute:subeni: IP address of a supplementary network interface

    neutron:LOADBALANCERV2: IP address of a shared load balancer

    neutron:LOADBALANCERV3: IP address of a dedicated load balancer

    network:endpoint_interface: IP address of a VPC endpoint

  • The value range specifies only the type of private IP addresses supported by the current service.

ip_address

String

Specifies the assigned private IP address.

Example Response

{
    "privateip":
        {
            "status": "DOWN",
            "id": "d600542a-b231-45ed-af05-e9930cb14f78",
            "subnet_id": "531dec0f-3116-411b-a21b-e612e42349fd",
            "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
            "device_owner": "",
            "ip_address": "192.168.1.11"
        }
}

Status Code

See Status Codes.

Error Code

See Error Codes.

last updated: 2024-11-08 14:19 UTC - commit: 27016cc3b7ea2cc53f679bb1d813c3e7d534c8cc