Updating a Bandwidth¶
Function¶
This API is used to update information about a bandwidth.
URI¶
PUT /v1/{project_id}/bandwidths/{bandwidth_id}
Table 1 describes the parameters.
Name | Mandatory | Description |
---|---|---|
project_id | Yes | Specifies the project ID. For details about how to obtain a project ID, see Obtaining a Project ID. |
bandwidth_id | Yes | Specifies the bandwidth ID, which uniquely identifies the bandwidth. |
Request Message¶
Request parameter
¶ Name
Mandatory
Type
Description
bandwidth
Yes
bandwidth object
Specifies the bandwidth objects. For details, see Table 3.
¶ Name
Mandatory
Type
Description
name
No
String
Specifies the bandwidth name.
The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.). If the value is left blank, the name of the bandwidth is not changed.
Either parameter name or size must be specified.
size
No
Integer
Specifies the bandwidth size in Mbit/s.
The value ranges from 1 Mbit/s to 300 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the available bandwidth range on the management console.) If the parameter is not included, the bandwidth size is not changed.
Either parameter name or size must be specified.
If a decimal fraction (for example 10.2) or a character string (for example "10") is specified, the specified value will be automatically converted to an integer.
The minimum increment for bandwidth adjustment varies depending on the bandwidth range. The details are as follows:
The minimum increment is 1 Mbit/s if the allowed bandwidth ranges from 0 Mbit/s to 300 Mbit/s (with 300 Mbit/s included).
The minimum increment is 50 Mbit/s if the allowed bandwidth ranges from 300 Mbit/s to 1000 Mbit/s (with 1000 Mbit/s included).
The minimum increment is 500 Mbit/s if the allowed bandwidth is greater than 1000 Mbit/s.
Example request
PUT https://{Endpoint}/v1/{project_id}/bandwidths/{bandwidth_id} { "bandwidth": {"name": "bandwidth123", "size": 10 } }
Response Message¶
Response parameter
¶ Name
Type
Description
bandwidth
bandwidth object
Specifies the bandwidth objects. For details, see Table 5.
¶ Name
Type
Description
name
String
Specifies the bandwidth name.
The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
size
Integer
Specifies the bandwidth size in Mbit/s.
The value ranges from 1 Mbit/s to 300 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the bandwidth range of each region on the management console.)
id
String
Specifies the bandwidth ID, which uniquely identifies the bandwidth.
share_type
String
The value is PER, indicating that the bandwidth is dedicated.
publicip_info
Array of publicip_info objects
Specifies the information about the EIP that uses the bandwidth. For details, see Table 6.
tenant_id
String
Specifies the project ID.
bandwidth_type
String
Specifies the bandwidth type.
The value is bgp.
charge_mode
String
Specifies whether the bandwidth is billed by traffic or by bandwidth size.
Possible values can be bandwidth (billed by bandwidth) and traffic (billed by traffic). If the value is an empty character string or no value is specified, value bandwidth is used.
billing_info
String
Specifies the bill information.
If billing_info is specified, the bandwidth is in yearly/monthly billing mode.
created_at
String
Specifies the time (UTC) when the bandwidth is created.
Format: yyyy-MM-ddTHH:mm:ss
updated_at
String
Specifies the time (UTC) when the bandwidth is updated.
Format: yyyy-MM-ddTHH:mm:ss
public_border_group
String
Specifies whether it is in a central site or an edge site.
Values:
center
Edge site name
This resource can only be associated with an EIP of the same region.
¶ Name
Type
Description
publicip_id
String
Specifies the ID of the EIP that uses the bandwidth.
publicip_address
String
Specifies the obtained EIP if only IPv4 EIPs are available.
publicip_type
String
Specifies the EIP type.
The value can be 5_bgp and 5_dualStack.
Constraints:
The configured value must be supported by the system.
Example response
{ "bandwidth": { "id": "3fa5b383-5a73-4dcb-a314-c6128546d855", "name": "bandwidth123", "size": 10, "share_type": "PER", "publicip_info": [ { "publicip_id": "6285e7be-fd9f-497c-bc2d-dd0bdea6efe0", "publicip_address": "161.xx.xx.9", "publicip_type": "5_bgp", "ip_version": 4 } ], "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c", "bandwidth_type": "bgp", "charge_mode": "bandwidth", "status": "NORMAL" } }
Status Code¶
See Status Codes.
Error Code¶
See Error Codes.