Configuring a Health Check¶
Function¶
This API is used to configure a health check.
Constraints¶
The security groups must have rules that allow access from 100.125.0.0/16. If you want to use UDP for health checks, ensure that the protocol of the backend server group is UDP.
URI¶
POST /v3/{project_id}/elb/healthmonitors
Parameter | Mandatory | Type | Description |
---|---|---|---|
project_id | Yes | String | Specifies the project ID. |
Request Parameters¶
Parameter | Mandatory | Type | Description |
---|---|---|---|
X-Auth-Token | Yes | String | Specifies the token used for IAM authentication. |
Parameter | Mandatory | Type | Description |
---|---|---|---|
healthmonitor | Yes | CreateHealthMonitorOption object | Specifies the health check. |
Parameter | Mandatory | Type | Description |
---|---|---|---|
admin_state_up | No | Boolean | Specifies the administrative status of the health check. Two value options are available. true indicates that the health check is enabled, and false indicates that the health check is disabled. Default: true |
delay | Yes | Integer | Specifies the interval between health checks, in seconds. Minimum: 1 Maximum: 50 |
domain_name | No | String | Specifies the domain name that HTTP requests are sent to during the health check. This parameter is available only when type is set to HTTP. The value is left blank by default, indicating that the virtual IP address of the load balancer is used as the destination address of HTTP requests. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. Minimum: 1 Maximum: 100 |
expected_codes | No | String | Specifies the expected HTTP status code. This parameter will take effect only when type is set to HTTP. The value options are as follows:
This parameter is unsupported. Please do not use it. Default: 200 Minimum: 1 Maximum: 64 |
http_method | No | String | Specifies the HTTP method. The value can be GET, HEAD, POST, PUT, DELETE, TRACE, OPTIONS, CONNECT, or PATCH. This parameter will take effect only when type is set to HTTP. This parameter is unsupported. Please do not use it. Default: GET Minimum: 1 Maximum: 16 |
max_retries | Yes | Integer | Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. The value ranges from 1 to 10. Minimum: 1 Maximum: 10 |
max_retries_down | No | Integer | Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. Minimum: 1 Maximum: 10 Default: 3 |
monitor_port | No | Integer | Specifies the port used for the health check. If this parameter is left blank, the port of the backend server group will be used by default. Minimum: 1 Maximum: 65535 |
name | No | String | Specifies the health check name. Minimum: 0 Maximum: 255 |
pool_id | Yes | String | Specifies the ID of the backend server group for which the health check is configured. |
project_id | No | String | Specifies the project ID. Minimum: 1 Maximum: 32 |
timeout | Yes | Integer | Specifies the maximum time required for waiting for a response from the health check, in seconds. It is recommended that you set the value less than that of parameter delay. Minimum: 1 Maximum: 50 |
type | Yes | String | Specifies the health check protocol. The value can be TCP, UDP_CONNECT, HTTP, HTTPS, or PING. |
url_path | No | String | Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. This parameter is available only when type is set to HTTP. Default: / Minimum: 1 Maximum: 255 |
Response Parameters¶
Status code: 201
Parameter | Type | Description |
---|---|---|
request_id | String | Specifies the request ID. The value is automatically generated. |
healthmonitor | HealthMonitor object | Specifies the health check. |
Parameter | Type | Description |
---|---|---|
admin_state_up | Boolean | Specifies the administrative status of the health check. Two value options are available. true indicates that the health check is enabled, and false indicates that the health check is disabled. Default: true |
delay | Integer | Specifies the interval between health checks, in seconds. Minimum: 1 Maximum: 50 |
domain_name | String | Specifies the domain name that HTTP requests are sent to during the health check. This parameter is available only when type is set to HTTP. The value is left blank by default, indicating that the virtual IP address of the load balancer is used as the destination address of HTTP requests. The value can contain only digits, letters, hyphens (-), and periods (.) and must start with a digit or letter. |
expected_codes | String | Specifies the expected HTTP status code. This parameter will take effect only when type is set to HTTP. The value options are as follows:
This parameter is unsupported. Please do not use it. Default: 200 |
http_method | String | Specifies the HTTP method. This parameter will take effect only when type is set to HTTP. The value can be GET, HEAD, POST, PUT, DELETE, TRACE, OPTIONS, CONNECT, or PATCH. This parameter is unsupported. Please do not use it. Default: GET |
id | String | Specifies the health check ID. |
max_retries | Integer | Specifies the number of consecutive health checks when the health check result of a backend server changes from OFFLINE to ONLINE. The value ranges from 1 to 10. Minimum: 1 Maximum: 10 |
max_retries_down | Integer | Specifies the number of consecutive health checks when the health check result of a backend server changes from ONLINE to OFFLINE. Minimum: 1 Maximum: 10 Default: 3 |
monitor_port | Integer | Specifies the port used for the health check. If this parameter is left blank, the port of the backend server group will be used by default. Minimum: 1 Maximum: 65535 |
name | String | Specifies the health check name. |
pools | Array of PoolRef objects | Lists the IDs of backend server groups for which the health check is configured. |
project_id | String | Specifies the project ID. |
timeout | Integer | Specifies the maximum time required for waiting for a response from the health check, in seconds. It is recommended that you set the value less than that of parameter delay. Minimum: 1 Maximum: 50 |
type | String | Specifies the health check protocol. |
url_path | String | Specifies the HTTP request path for the health check. The value must start with a slash (/), and the default value is /. This parameter is available only when type is set to HTTP. Default: / |
Parameter | Type | Description |
---|---|---|
id | String | Specifies the ID of the backend server group. |
Example Requests¶
POST
https://{elb_endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/healthmonitors
{
"healthmonitor" : {
"name" : "My Healthmonitor",
"max_retries" : 3,
"pool_id" : "488acc50-6bcf-423d-8f0a-0f4184f5b8a0",
"type" : "HTTP",
"timeout" : 30,
"delay" : 1
}
}
Example Responses¶
Status code: 201
Successful request.
{
"request_id" : "0e837340-f1bd-4037-8f61-9923d0f0b19e",
"healthmonitor" : {
"monitor_port" : null,
"id" : "c2b210b2-60c4-449d-91e2-9e9ea1dd7441",
"project_id" : "99a3fff0d03c428eac3678da6a7d0f24",
"domain_name" : null,
"name" : "My Healthmonitor",
"delay" : 1,
"max_retries" : 3,
"pools" : [ {
"id" : "488acc50-6bcf-423d-8f0a-0f4184f5b8a0"
} ],
"admin_state_up" : true,
"timeout" : 30,
"type" : "HTTP",
"expected_codes" : "200",
"url_path" : "/",
"http_method" : "GET"
}
}
Status Codes¶
Status Code | Description |
---|---|
201 | Successful request. |
Error Codes¶
See Error Codes.