Security Group Configuration Examples¶
This section shows examples of common security group configurations. In the examples, all outgoing data packets are allowed by default. We only describe how to configure inbound rules for security groups.
Note
For details about how to configure and modify security group rules, see Configuring Security Group Rules and Changing a Security Group.
Enabling ECSs in Different Security Groups to Communicate with Each Other Through an Internal Network¶
Example scenario:
Resources on an ECS in a security group need to be copied to an ECS associated with another security group. The two ECSs are in the same VPC. We recommend that you enable private network communication between the ECSs and then copy the resources.
Security group configuration:
Within a given VPC, ECSs in the same security group can communicate with one another by default. However, ECSs in different security groups cannot communicate with each other by default. To enable these ECSs to communicate with each other, you need to add certain security group rules.
You can add an inbound rule to the security groups containing the ECSs to allow access from ECSs in the other security group. The required rule is as follows.
Direction
Protocol
Port
Source
Inbound
TCP
Note
Select a protocol used for communication through an internal network.
All
ID of another security group
Example: 014d7278-XXX-530c95350d43
Enabling Specified IP Addresses to Remotely Access ECSs in a Security Group¶
Example scenario:
To prevent ECSs from being attacked, you can change the port for remote login and configure security group rules that allow only specified IP addresses to remotely access the ECSs.
Security group configuration:
To allow IP address 192.168.20.2 to remotely access Linux ECSs in a security group over the SSH protocol (port 22), you can configure the following security group rule.
Direction
Protocol
Port
Source
Inbound
SSH
22
IPv4 CIDR block or ID of another security group
For example, 192.168.20.2/32
Remotely Connecting to Linux ECSs Using SSH¶
Example scenario:
After creating Linux ECSs, you can add a security group rule to enable remote SSH access to the ECSs.
Security group rule:
Direction
Protocol
Port
Source
Inbound
SSH
22
0.0.0.0/0
Remotely Connecting to Windows ECSs Using RDP¶
Example scenario:
After creating Windows ECSs, you can add a security group rule to enable remote RDP access to the ECSs.
Security group rule:
Direction
Protocol
Port
Source
Inbound
RDP
3389
0.0.0.0/0
Enabling Communication Between ECSs¶
Example scenario:
After creating ECSs, you need to add a security group rule so that you can run the ping command to test communication between the ECSs.
Security group rule:
Direction
Protocol
Port
Source
Inbound
ICMP
All
0.0.0.0/0
Hosting a Website on ECSs¶
Example scenario:
If you deploy a website on your ECSs and require that your website be accessed over HTTP or HTTPS, you can add rules to the security group used by the ECSs that function as the web servers.
Security group rule:
Direction
Protocol
Port
Source
Inbound
HTTP
80
0.0.0.0/0
Inbound
HTTPS
443
0.0.0.0/0
Enabling an ECS to Function as a DNS Server¶
Example scenario:
If you need to use an ECS as a DNS server, you must allow TCP and UDP access from port 53 to the DNS server. You can add the following rules to the security group associated with the ECS.
Security group rules:
Direction
Protocol
Port
Source
Inbound
TCP
53
0.0.0.0/0
Inbound
UDP
53
0.0.0.0/0
Uploading or Downloading Files Using FTP¶
Example scenario:
If you want to use File Transfer Protocol (FTP) to upload files to or download files from ECSs, you need to add a security group rule.
Note
You must first install the FTP server program on the ECSs and check whether ports 20 and 21 are working properly.
Security group rule:
Direction
Protocol
Port
Source
Inbound
TCP
20-21
0.0.0.0/0