Creating a Node Pool

Function

This API is used to create a node pool in a specified cluster.

URI

POST /api/v3/projects/{project_id}/clusters/{cluster_id}/nodepools

Table 1 describes the parameters of the API.

Table 1 Parameter description

Parameter	Mandatory	Description
project_id	Yes	Project ID. For details about how to obtain the project ID, see How to Obtain Parameters in the API URI.
cluster_id	Yes	Cluster ID. For details about how to obtain the cluster ID, see How to Obtain Parameters in the API URI.

Request

Request parameters:

Table 2 and Table 3 describe the request parameters.

Table 2 Parameters in the request header

Parameter	Mandatory	String	Description
Content-Type	Yes	String	Message body type (format). Default: application/json
X-Auth-Token	Yes	String	Requests for calling an API can be authenticated using either a token or AK/SK. If token-based authentication is used, this parameter is mandatory and must be set to a user token. For details on how to obtain a user token, see API Usage Guidelines.

Table 3 NodePool structure

Parameter	Mandatory	Type	Description
kind	Yes	String	API type, which is fixed at NodePool.
apiVersion	Yes	String	API version, which is fixed at v3.
metadata	Yes	metadata object	Metadata of the node pool.
spec	Yes	spec object	Parameters of the node pool.

Table 4 Data structure of the metadata field

Parameter	Mandatory	Type	Description
name	Yes	String	Node pool name. Naming rule: Enter 1 to 50 characters that starts with a lowercase letter and cannot end with a hyphen (-). Lowercase letters, digits, and hyphens (-) are allowed. The value cannot be DefaultPool.

Table 5 Data structure of the spec field

Parameter	Mandatory	Type	Description
type	No	String	Node pool type. If this parameter is left blank, the value vm is used by default. vm: ECS ElasticBMS: BMS. This value is valid in CCE Turbo cluster.
nodeTemplate	Yes	nodeTemplate object	Parameters of the node pool template. If az is set to random, when you create a node pool or update the number of nodes in a node pool, a scaling task is triggered. The system selects an AZ from all AZs where scaling is allowed to add nodes based on priorities. AZs with a smaller number of existing nodes have a higher priority. If AZs have the same number of nodes, the system selects the AZ based on the AZ sequence. Example: Creating nodes in a node pool for the first time: Assume that AZ 1, AZ 2, and AZ 3 have available resources. These AZs have the same priority because they have no existing nodes. In this case, AZ 1 is selected by sequence to create all nodes to be added. Adding nodes to a node pool that already has nodes: Assume that the node pool has 1 node in AZ 1, 3 in AZ 2, and 2 in AZ 3, and that resources in AZ 1 have been sold out. Only AZ 2 and AZ 3 are available for scaling. In this case, AZ 3 has a higher priority than AZ 2 because AZ 3 has less nodes. Therefore, all nodes to be added will be created in AZ 3. Assume that the node pool has 1 node in AZ 1, 2 in AZ 2, and 2 in AZ 3, and that resources in AZ 1 have been sold out. Only AZ 2 and AZ 3 are available for scaling. In this case, AZ 2 and AZ 3 have the same priority because they have the same number of nodes. Therefore, all nodes to be added will be created in AZ 2.
initialNodeCount	Yes	Integer	Expected number of nodes in this node pool. The value cannot be greater than the maximum number of nodes allowed for the cluster.
autoscaling	No	autoscaling object	Auto scaling parameters.
nodeManagement	No	nodeManagement object	Node management parameters.
customSecurityGroups	No	Array of strings	Custom security group settings for a node pool. New nodes scaled out in a node pool can be bound to a specified security group. Specifying no security group ID will add the new nodes to the default security group of the worker nodes. Specifying a valid security group ID will put new nodes in that security group. When specifying a security group, do not modify the rules of the port on which CCE running depends.

Table 6 Data structure of the nodeTemplate field

Parameter	Mandatory	Type	Description
flavor	Yes	String	Node specifications. For details, see the description of the flavorRef parameter in Creating an ECS. Note When adding a BMS node, check whether the flavor of the node to be added supports local disks. If local disks are not supported, add at least one 100 GB EVS disk.
az	Yes	String	AZ of the node. For details, see the description of the availability_zone parameter in .
os	No	String	Nodes in clusters of Kubernetes v1.13, v1.15, v1.17, v1.19, v1.21, v1.23, or v1.25 support EulerOS 2.5. Nodes in clusters of Kubernetes v1.19 or later support EulerOS 2.9. Nodes in clusters of Kubernetes v1.25 or later support Ubuntu 22.04. Nodes in clusters of Kubernetes v1.27 or later support HCE OS 2.0. Note If the alpha.cce/NodeImageID parameter in extendParam is specified during node creation, you do not need to set this field.
login	Yes	login object	Node login mode, which can be key pair or password.
rootVolume	Yes	Volume object	System disk parameters of the node.
dataVolumes	Yes	Array of Volume object	Data disk parameters of the node.
storage	No	Storage object	Disk initialization management parameter. This parameter is complex to configure. For details, see Attaching Disks to a Node. If this parameter retains its default, disks are managed based on the DockerLVMConfigOverride (discarded) parameter in extendParam. This parameter is supported by clusters of version 1.15.11 and later. Note If a node specification involves local disks and EVS disks at the same time, do not retain the default value of this parameter to prevent unexpected disk partitions.
publicIP	No	publicIP object	EIP used by the node to access public networks.
billingMode	No	Integer	Billing mode of a node. Note This field is not supported for the current version.
count	Yes	Integer	Number of nodes to be created in a batch. The value must be a positive integer greater than or equal to 1 and less than or equal to the defined limit. This field can be set to 0 for a node pool.
extendParam	No	extendParam object	Extended parameter. Format: Key-value pair.
userTags	No	Object	Tag of a VM. The format is key-value pair. The number of key-value pairs cannot exceed 20. Key: Only letters, digits, hyphens (-), underscores (_), and at signs (@) are supported. Value: Only letters, digits, hyphens (-), underscores (_), and at signs (@) are supported. Example: "userTags": [ { "key": "tag1", "value": "aaaa" }, { "key": "tag2", "value": "bbbb" } ]
k8sTags	No	Object	Tag of a Kubernetes node. The format is key-value pair. The number of key-value pairs cannot exceed 20. Key: Enter 1 to 63 characters starting with a letter or digit. Only letters, digits, hyphens (-), underscores (_), and periods (.) are allowed. A DNS subdomain can be prefixed to a key and contain a maximum of 253 characters. Example DNS subdomain: example.com/my-key Value: The value can be left blank or a string of 1 to 63 characters starting with a letter or digit. Only letters, digits, hyphens (-), underscores (_), and periods (.) are allowed in the character string. Example: "k8sTags": { "key": "value" }
taints	No	Object	You can add taints to created nodes to configure anti-affinity. Each taint contains the following parameters: Key: A key must contain 1 to 63 characters starting with a letter or digit. Only letters, digits, hyphens (-), underscores (_), and periods (.) are allowed. A DNS subdomain name can be used as the prefix of a key. Value: A value must start with a letter or digit and can contain a maximum of 63 characters, including letters, digits, hyphens (-), underscores (_), and periods (.). Effect: Available options are NoSchedule, PreferNoSchedule, and NoExecute. Example: "taints": [{ "key": "status", "value": "unavailable", "effect": "NoSchedule" }, { "key": "looks", "value": "bad", "effect": "NoSchedule" }]
nodeNicSpec	No	nodeNicSpec object	Description about the node NIC.
runtime	No	Runtime object	Container runtime. The default value is docker.

Table 7 Data structure of the login field

Parameter	Mandatory	Type	Description
sshKey	No	String	Name of the key pair used for node login. For details on how to create a key pair, see Creating a Key Pair.
userPassword	No	String	Password used for node login. Note This field is not supported for the current version.

Table 8 Data structure of the Volume field

Parameter	Mandatory	Type	Description
volumetype	No	String	Disk type. For details, see the description of root_volume in Creating an ECS. SATA: common I/O disk type. SAS: high I/O disk type. SSD: ultra-high I/O disk type.
size	No	Integer	Disk size, in GB. Value range for system disks: 40 to 1024. Value range for data disks: 100 to 32768.
extendParam	No	Map<String,Object>	Disk extension parameter. For details, see the description of the extendparam parameter in Creating an ECS.
hw:passthrough	No	Boolean	Pay attention to this field if your ECS is SDI-compliant. If the value of this field is true, the created disk is of the SCSI type. If the node pool type is ElasticBMS, this field must be set to true.
metadata	No	dataVolumeMetadata object	Data disk encryption information. This parameter is mandatory only when the data disk of the node to be created needs to be encrypted. If data disks are created using a data disk image, this parameter cannot be used.

Table 9 Data structure of the dataVolumeMetadata field

Parameter	Mandatory	Type	Description
__system__encrypted	No	String	Whether an EVS disk is encrypted. '0': not encrypted '1': encrypted If this parameter is not specified, EVS disks will not be encrypted by default.
__system__cmkid	Yes	String	CMK ID used for encryption. This parameter is used with __system__encrypted. Note You can obtain the ID through HTTPS requests. For details, see Querying the List of CMKs.

Table 10 Data structure of the publicIP field

Parameter	Mandatory	Type	Description
ids	No	Array of strings	List of IDs of the existing EIPs. Important NOTICE: If ids is set, you do not need to set count and eip.
count	No	Integer	Number of EIPs to be dynamically created. Important NOTICE: The count and eip parameters must be set simultaneously.
eip	No	eip object	EIP. Important NOTICE: The count and eip parameters must be set simultaneously.

Table 11 Data structure of the eip field

Parameter	Mandatory	Type	Description
iptype	Yes	String	Type of the EIP.
bandwidth	Yes	bandwidth object	Bandwidth parameters of the EIP.

Table 12 Data structure of the bandwidth field

Parameter	Mandatory	Type	Description
chargemode	No	String	Bandwidth billing mode. If this parameter is not carried, the node is billed by bandwidth. If this parameter is carried but is left blank, the node is billed by bandwidth. If this parameter is set to traffic, the node is billed by traffic. If this parameter is set to another value, node creation will fail. Note Billed by bandwidth: The billing will be based on the data transfer rate (in Mbps) of public networks. If your bandwidth usage is higher than 10%, this billing mode is recommended. Billed by traffic: The billing will be based on the total traffic (in GB) transferred on public networks. If your bandwidth usage is lower than 10%, this billing mode is recommended.
size	Yes	Integer	Bandwidth size.
sharetype	Yes	String	Bandwidth sharing type.

Table 13 Data structure of the spec/extendParam field

Parameter	Mandatory	Type	Description
maxPods	No	Integer	Maximum number of pods on the node.
agency_name	No	String	Specifies the IAM agency name.
alpha.cce/preInstall	No	String	Script required before the installation. Note The input value must be encoded using Base64. (Command: echo -n "Content to be encoded" | base64)
alpha.cce/postInstall	No	String	Script required after the installation. Note The input value must be encoded using Base64. (Command: echo -n "Content to be encoded" | base64)
alpha.cce/NodeImageID	No	String	Mandatory if a custom image is used in creating a bare metal node.
DockerLVMConfigOverride	No	String	Docker data disk configuration item. (This parameter has been discarded. Use the storage field instead.)The following is an example configuration: "DockerLVMConfigOverride":"dockerThinpool=vgpaas/90%VG;kubernetesLV=vgpaas/10%VG;diskType=evs;lvType=linear" In this example: userLV: size of the user space, for example, vgpaas/20%VG. userPath: mount path of the user space, for example, /home/wqt-test. diskType: disk type. Currently, only the evs, hdd, and ssd are supported. lvType: type of a logic volume. Currently, the value can be linear or striped. dockerThinpool: Docker space size, for example, vgpaas/60%VG. kubernetesLV: kubelet space size, for example, vgpaas/20%VG.
publicKey	No	String	Public key of the node. Used when creating a key pair.
nicMultiqueue	No	String	ENI queue settings, the default setting is: "[{\"queue\":4}]" queue indicates the number of ENI queues. Supported proportions are {"1":128, "2":92, "4":92, "8":32, "16":16, "28":9}. That is, there is one queue, a maximum of 128 ENIs can be bound. If there are two queues, a maximum of 92 ENIs can be bound. A larger number of ENI queues indicates higher performance but fewer ENIs can be bound. The queue settings cannot be changed after the node pool is created.
nicThreshold	No	String	ENI pre-binding thresholds, the default setting is: "0.3:0.6" The first decimal place indicates the low threshold. Formula: Minimum number of pre-bound ENIs = Min (128 x Low threshold, Maximum number of ENIs that can be bound to the queue) The second decimal place indicates the high threshold. Formula: Maximum number of pre-bound ENIs = Min (128 x High threshold, Maximum number of ENIs that can be bound to the queue) The high and low thresholds of the number of pre-bound ENIs are restricted by the maximum number of ENIs that can be bound to a queue. ENIs bound to a BMS node = Number of ENIs currently used by pods + Number of pre-bound ENIs CCE keeps binding ENIs to a BMS node to ensure that the minimum number of ENIs is always reached. (Min. pre-bound ENIs <= Number of pre-bound ENIs + Number of ENIs currently used by pods) At every 2 minutes, CCE releases ENIs pre-bound to a BMS node to ensure that the maximum number of ENIs will not be exceeded. (Max. pre-bound ENIs >= Number of pre-bound ENIs + Number of ENIs currently used by pods) Both the thresholds are one-decimal-place values ranging from 0.0 to 1.0. The low threshold must be smaller than or equal to the high one. Pre-binding ENIs can speed up workload creation but occupies IP addresses.

Table 14 Data structure of the nodeNicSpec field

Parameter	Mandatory	Type	Description
primaryNic	No	primaryNic object	Description about the primary NIC.
extNics	No	Array of extNics objects	Extension NIC.

Table 15 Data structure of the primaryNic/extNics field

Parameter	Mandatory	Type	Description
subnetId	No	String	Network ID of the subnet to which the NIC belongs.
fixedIps	No	Array of strings	The IP address of the primary NIC is specified by fixedIps. The number of IP addresses cannot be greater than the number of created nodes. fixedIps and ipBlock cannot be specified at the same time.
ipBlock	No	String	CIDR format of the IP address segment. The IP address of the created node falls in this IP address segment. fixedIps and ipBlock cannot be specified at the same time.

Table 16 Data structure of the autoscaling field

Parameter	Mandatory	Type	Description
enable	No	Boolean	Whether to enable auto scaling.
minNodeCount	No	Integer	Minimum number of nodes after a scale-down if auto scaling is enabled.
maxNodeCount	No	Integer	Maximum number of nodes after a scale-up if auto scaling is enabled. The value of this parameter must be greater than or equal to that of minNodeCount and does not exceed the maximum number of nodes for the cluster.
scaleDownCooldownTime	No	Integer	Interval during which nodes added after a scale-up will not be deleted, in minutes.
priority	No	Integer	Node pool weight. A higher weight indicates a higher priority in scale-up.

Table 17 Data structure of the nodeManagement field

Parameter	Mandatory	Type	Description
serverGroupReference	No	String	ECS group ID. If this parameter is specified, all nodes in the node pool will be created in this ECS group.

Table 18 Runtime

Parameter	Mandatory	Type	Description
name	No	String	Container runtime. The default value is docker. Enumeration values: docker containerd

Table 19 Storage

Parameter	Mandatory	Type	Description
storageSelectors	Yes	Array of StorageSelectors objects	Disk selection. Matched disks are managed according to matchLabels and storageType.
storageGroups	Yes	Array of StorageGroups objects	A storage group consists of multiple storage devices. It is used to divide storage space.

Table 20 StorageSelectors

Parameter	Mandatory	Type	Description
name	Yes	String	Selector name, used as the index of selectorNames in storageGroup. Therefore, the name of each selector must be unique.
storageType	Yes	String	Specifies the storage type. Currently, only evs (EVS volumes) and local (local volumes) are supported. The local storage does not support disk selection. All local disks will form a VG. Therefore, only one storageSelector of the local type is allowed.
matchLabels	No	matchLabels object	Matching field of an EVS volume. The size, volumeType, metadataEncrypted, metadataCmkid and count fields are supported.

Table 21 matchLabels

Parameter	Mandatory	Type	Description
size	No	String	Matched disk size. If this parameter is left unspecified, the disk size is not limited. Example: 100
volumeType	No	String	EVS disk type.
metadataEncrypted	No	String	Disk encryption identifier. 0 indicates that the disk is not encrypted, and 1 indicates that the disk is encrypted.
metadataCmkid	No	String	Customer master key ID of an encrypted disk. The value is a 36-byte string.
count	No	String	Number of disks to be selected. If this parameter is left blank, all disks of this type are selected.

Table 22 StorageGroups

Parameter	Mandatory	Type	Description
name	Yes	String	Name of a virtual storage group, which must be unique.
cceManaged	No	Boolean	Storage space for Kubernetes and runtime components. Only one group can be set to true. If this parameter is left blank, the default value false is used.
selectorNames	Yes	Array of strings	This parameter corresponds to name in storageSelectors. A group can match multiple selectors, but a selector can match only one group.
virtualSpaces	Yes	Array of VirtualSpace objects	Detailed management of space configuration in a group.

Table 23 VirtualSpace

Parameter	Mandatory	Type	Description
name	Yes	String	Name of a virtualSpace. Kubernetes: Kubernetes space configuration. lvmConfig needs to be configured. runtime: runtime space configuration. runtimeConfig needs to be configured. user: user space configuration. lvmConfig needs to be configured.
size	Yes	String	Size of a virtualSpace. The value must be an integer in percentage. Example: 90%. Note The sum of the percentages of all virtualSpaces in a group cannot exceed 100%.
lvmConfig	No	LVMConfig object	LVM configurations, applicable to kubernetes and user spaces. Note that one virtual space supports only one config.
runtimeConfig	No	RuntimeConfig object	runtime configurations, applicable to the runtime space. Note that one virtual space supports only one config.

Table 24 LVMConfig

Parameter	Mandatory	Type	Description
lvType	Yes	String	LVM write mode. linear indicates the linear mode. striped indicates the striped mode, in which multiple disks are used to form a strip to improve disk performance.
path	No	String	Path to which the disk is attached. This parameter takes effect only in user configuration. The value is an absolute path. Digits, letters, periods (.), hyphens (-), and underscores (_) are allowed.

Table 25 RuntimeConfig

Parameter	Mandatory	Type	Description
lvType	Yes	String	LVM write mode. linear indicates the linear mode. striped indicates the striped mode, in which multiple disks are used to form a strip to improve disk performance.

Example Request

CCE cluster:

{
    "kind": "NodePool",
    "apiVersion": "v3",
    "metadata": {
        "name": "wyr-17-nodepool-53042"
    },
    "spec": {
        "initialNodeCount": 0,
        "type": "vm",
        "autoscaling": {
            "enable": true,
            "minNodeCount": 1,
            "maxNodeCount": 3,
            "scaleDownCooldownTime": 10,
            "priority": 1
        },
        "nodeManagement": {
            "serverGroupReference": "2129f95a-f233-4cd8-a1b2-9c0acdf918d3"
        },
        "nodeTemplate": {
            "flavor": "s6.large.2",
            "az": "",
            "os": "EulerOS 2.5",
            "login": {
                "sshKey": "KeyPair-nodepool"
            },
            "rootVolume": {
                "volumetype": "SATA",
                "size": 40
            },
            "dataVolumes": [
                {
                    "volumetype": "SATA",
                    "size": 100,
                    "extendParam": {
                        "useType": "docker"
                    }
                }
            ],
            "billingMode": 0,
            "extendParam": {
                "alpha.cce/preInstall": "bHMgLWw=",
                "alpha.cce/postInstall": "bHMgLWwK",
                "alpha.cce/NodeImageID": "85bd7ec5-bca4-4f5f-947b-6c1bf02599d3",
                "maxPods": 110,
                "DockerLVMConfigOverride": "dockerThinpool=vgpaas/90%VG;kubernetesLV=vgpaas/10%VG;diskType=evs;lvType=linear"
            },
            "k8sTags": {
                "tag1": "value1",
                "tag2": "value2"
            },
            "taints": [
                {
                    "key": "aaa",
                    "value": "bbb",
                    "effect": "NoSchedule"
                },
                {
                    "key": "ccc",
                    "value": "ddd",
                    "effect": "NoSchedule"
                }
            ],
            "userTags": [
                {
                    "key": "resource-tag1",
                    "value": "value1"
                },
                {
                    "key": "resource-tag2",
                    "value": "value2"
                }
            ],
            "nodeNicSpec": {
                "primaryNic": {
                    "subnetId": "31be174a-0c7f-4b71-bb0d-d325fecb90ef"
                }
            }
        }
    }
}

Response

Response parameters:

Table 26 describes the response parameters.

Table 26 Response parameters

Parameter	Type	Description
kind	String	API type. The value is fixed to NodePool.
apiVersion	String	API version. The value is fixed to v3.
metadata	metadata object	Node pool metadata.
spec	spec object	Detailed node pool parameters.
status	status object	Node pool status.

Table 27 Data structure of the metadata field

Parameter	Type	Description
name	String	Name of the node pool.
uid	String	ID of the node pool.

Table 28 Data structure of the spec field

Parameter	Type	Description
type	String	Node type. Currently, only VM nodes are supported.
initialNodeCount	Integer	Initial number of nodes for the node pool.
nodeTemplate	nodeTemplate object	Detailed parameters of the node pool template.
autoscaling	autoscaling object	Auto scaling parameters.
nodeManagement	nodeManagement object	Node management parameters.
customSecurityGroups	Array of strings	Custom security group settings for a node pool. New nodes scaled out in a node pool can be bound to a specified security group. Specifying no security group ID will add the new nodes to the default security group of the worker nodes. Specifying a valid security group ID will put new nodes in that security group. When specifying a security group, do not modify the rules of the port on which CCE running depends.

Table 29 Data structure of the autoscaling field

Parameter	Type	Description
enable	Boolean	Whether to enable auto scaling.
minNodeCount	Integer	Minimum number of nodes allowed if auto scaling is enabled. The value cannot be greater than the maximum number of nodes allowed by the cluster specifications. Minimum: 0
maxNodeCount	Integer	Maximum number of nodes allowed if auto scaling is enabled. This value must be greater than or equal to the value of minNodeCount and cannot exceed the maximum number of nodes in the cluster specifications. Minimum: 0
scaleDownCooldownTime	Integer	Interval between two scaling operations, in minutes. During this period, nodes added after a scale-up will not be deleted. Minimum: 0 Maximum: 2147483647
priority	Integer	Weight of a node pool. A node pool with a higher weight has a higher priority during scaling.

Table 30 Data structure of the nodeManagement field

Parameter	Type	Description
serverGroupReference	String	ECS group ID. If this parameter is specified, all nodes in the node pool will be created in this ECS group.

Table 31 Data structure of the status field

Parameter	Type	Description
currentNode	Integer	Number of nodes in the node pool.
deletingNode	Integer	Number of nodes being deleted in the node pool.
creatingNode	Integer	Number of nodes being created in the node pool.
phase	String	Node pool status. Synchronizing: The node is being synchronized. Synchronized: The node has been synchronized. SoldOut: Nodes have been sold out. Deleting: The node is being deleted. Error: An error occurred when the node is being added. Enumeration values: Synchronizing Synchronized SoldOut Deleting Error Note If the status is blank, the status is normal.
jobId	String	ID of the job to delete the node pool.

Example response:

CCE cluster:

{
    "kind": "NodePool",
    "apiVersion": "v3",
    "metadata": {
        "name": "wyr-17-nodepool-53042",
        "uid": "feec6013-cd7e-11ea-8c7a-0255ac100be7"
    },
    "spec": {
        "initialNodeCount": 0,
        "type": "vm",
        "nodeTemplate": {
            "flavor": "s6.large.2",
            "az": "",
            "os": "EulerOS 2.5",
            "login": {
                "sshKey": "KeyPair-nodepool",
                "userPassword": {}
            },
            "rootVolume": {
                "volumetype": "SATA",
                "size": 40
            },
            "dataVolumes": [
                {
                    "volumetype": "SATA",
                    "size": 100,
                    "extendParam": {
                        "useType": "docker"
                    }
                }
            ],
            "storage": {
                "storageSelectors": [
                    {
                        "name": "cceUse",
                        "storageType": "evs",
                        "matchLabels": {
                            "size": "100",
                            "volumeType": "SAS",
                            "count": "1"
                        }
                    }
                ],
                "storageGroups": [
                    {
                        "name": "vgpaas",
                        "selectorNames": [
                            "cceUse"
                        ],
                        "cceManaged": true,
                        "virtualSpaces": [
                            {
                                "name": "runtime",
                                "size": "90%"
                            },
                            {
                                "name": "kubernetes",
                                "size": "10%"
                            }
                        ]
                    }
                ]
            },
            "runtime": {
                "name":"docker"
            },
            "publicIP": {
                "eip": {
                    "bandwidth": {}
                }
            },
            "nodeNicSpec": {
                "primaryNic": {
                    "subnetId": "31be174a-0c7f-4b71-bb0d-d325fecb90ef"
                }
            },
            "billingMode": 0,
            "taints": [
                {
                    "key": "aaa",
                    "value": "bbb",
                    "effect": "NoSchedule"
                },
                {
                    "key": "ccc",
                    "value": "ddd",
                    "effect": "NoSchedule"
                }
            ],
            "k8sTags": {
                "cce.cloud.com/cce-nodepool": "wyr-17-nodepool-53042",
                "tag1": "value1",
                "tag2": "value2"
            },
            "userTags": [
                {
                    "key": "resource-tag1",
                    "value": "value1"
                },
                {
                    "key": "resource-tag2",
                    "value": "value2"
                }
            ],
            "extendParam": {
                "DockerLVMConfigOverride": "dockerThinpool=vgpaas/90%VG;kubernetesLV=vgpaas/10%VG;diskType=evs;lvType=linear",
                "alpha.cce/NodeImageID": "85bd7ec5-bca4-4f5f-947b-6c1bf02599d3",
                "alpha.cce/postInstall": "bHMgLWwK",
                "alpha.cce/preInstall": "bHMgLWw=",
                "maxPods": 110,
                "publicKey": "ssh-rsa AAAAB3NzaC1yc2EAAAADAQA***d-by-Nova\n"
            }
        },
        "autoscaling": {
            "enable": true,
            "minNodeCount": 1,
            "maxNodeCount": 3,
            "scaleDownCooldownTime": 10,
            "priority": 1
        },
        "nodeManagement": {
            "serverGroupReference": "2129f95a-f233-4cd8-a1b2-9c0acdf918d3"
        }
    },
    "status": {
        "currentNode": 0,
        "deletingNode": 0,
        "creatingNode": 0,
        "phase": ""
    }
}

Status Code

Table 32 describes the status code of this API.

Table 32 Status code

Status Code	Description
201	The job for creating a node in a specified cluster is successfully delivered.

For the description about error status codes, see Status Code.

last updated: 2024-11-08 14:16 UTC - commit: 7c478af3470092ad91013d02b08e29c6a61c275d